Installing the trim on the lower bumper cover
WARNING: This page is about a different car, the 2023 BMW X5, 2022 BMW X5, 2021 BMW X5, 2020 BMW X5, and 2019 BMW X5. However, it is still accessible from the selected car via links, so may be relevant.
- Correctly position the trim on the lower bumper cover (3) and engage in the latch mechanism along the dashed line.
- Mount blind rivet (2) using the special tool 0 496 521 (00 2 230) .
- Tighten down screws (1).
TIGHTENING TORQUE SPECIFICATIONS
| Bumper panel, rear | ||
|---|---|---|
| Hexagon screw | Tightening torque | 3.0 Nm |