Installing the wheel arch cover on the front, bottom left and right
WARNING: This page is about a different car, the 2023 BMW X5, 2022 BMW X5, 2021 BMW X5, 2020 BMW X5, and 2019 BMW X5. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:
Perform the steps on the right and left side.
Installing the front bottom wheel arch cover
- Feed in the front bottom wheel arch cover (1).
- Tighten all bolts (arrows).
TIGHTENING TORQUE SPECIFICATIONS
| Lower front wheel arch cover |
| Thermoplastic hexagon screw |
tightening torque |
2.6 Nm |
 Courtesy of BMW OF NORTH AMERICA, INC.
|