Installing the clean air pipe and the resonator

WARNING: This page is about a different car, the 2023 BMW X5, 2022 BMW X5, 2021 BMW X5, 2020 BMW X5, and 2019 BMW X5. However, it is still accessible from the selected car via links, so may be relevant.

Insert the clean air pipe (4) and connect it to the exhaust turbocharger.
Lock the clamp (2) audibly on the exhaust turbocharger.
Insert the resonator (1) into the rubber mount and fasten.
Connect tank vent line (3) and lock.

Courtesy of BMW OF NORTH AMERICA, INC.
Connect connectors (1) and lock audibly.
Connect connectors (2) and lock audibly.
Fasten the cable with the cable bracket (3) to the engine ventilation line.

Courtesy of BMW OF NORTH AMERICA, INC.
Connect engine ventilation line (1) and lock.

Courtesy of BMW OF NORTH AMERICA, INC.

Follow-up work

Refer to INSTALLING THE INTAKE FILTER HOUSING (TENSION STRUT REMOVED ON SHOCK TOWER) .
Refer to INSTALLING THE TENSION STRUT ON THE RIGHT SHOCK TOWER .
Refer to INSTALLING ACOUSTIC COVER .