Fitting the lower part of the rear spoiler

WARNING: This page is about a different car, the 2023 BMW X5, 2022 BMW X5, 2021 BMW X5, 2020 BMW X5, and 2019 BMW X5. However, it is still accessible from the selected car via links, so may be relevant.

NOTE: RISK OF DAMAGE
Careless handling of tools and sharp-edged components .
Scratches, surface damage .

Protect working area.
Handle tools and components carefully.

Install the lower part of the rear spoiler (2) and clip in the clips (3).
Tighten the screws (1).

TIGHTENING TORQUE SPECIFICATIONS

Rear spoiler, lower part
Oval-head screw	Tightening torque	8.0 Nm

Courtesy of BMW OF NORTH AMERICA, INC.

Feed antenna (3) in.
Connect and lock the washer fluid hose (2).
Connect connectors (1) and lock.

Courtesy of BMW OF NORTH AMERICA, INC.
Tighten screws (2).

TIGHTENING TORQUE SPECIFICATIONS

REAR SPOILER
Oval-head screw	Tightening torque	3.1 Nm

Tighten the screws (1) and install the covers.

Courtesy of BMW OF NORTH AMERICA, INC.

TIGHTENING TORQUE SPECIFICATIONS

REAR SPOILER
Oval-head screw	Tightening torque	3.1 Nm

Follow-up work

Refer to INSTALL REAR SPOILER .