Installing the luggage compartment trim panel on the right
WARNING: This page is about a different car, the 2023 BMW X5, 2022 BMW X5, 2021 BMW X5, 2020 BMW X5, and 2019 BMW X5. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:
Description is for left component only. Procedure on the right side is identical.
Installing trim panel of luggage compartment
- Feed in and correctly position trim panel of luggage compartment (2).
- Tighten the screws (1) and nuts (2).
TIGHTENING TORQUE SPECIFICATIONS
| Luggage compartment trim panel to body | ||
|---|---|---|
| Oval-head screw M5x16 |
Tightening torque | 3.0 Nm |
| hexagon screw M4.8x19 |
Tightening torque | 3.0 Nm |
| Plastic nut | Tightening torque | 2.6 Nm |
Follow-up work
- Refer to INSTALLING THE RIGHT D-PILLAR TRIM PANEL .
- Refer to INSTALLING THE RIGHT C-PILLAR TRIM PANEL .
- Refer to INSTALL RIGHT LUGGAGE COMPARTMENT WHEEL ARCH TRIM PANEL (ALL EQUIPMENT VERSIONS) .
- Refer to INSTALLING THE RIGHT BOTTOM C-PILLAR TRIM PANEL .
- Refer to INSTALLING THE RIGHT BOTTOM C-PILLAR TRIM PANEL (3RD ROW OF SEATS) .
- Refer to INSTALLING RIGHT BACKREST SIDE SECTION .
- Refer to INSTALLING THE REAR DOOR SILL COVER STRIP (ELECTRICAL REAR SEAT) .
- Refer to INSTALLING THE LEFT OR RIGHT LUGGAGE COMPARTMENT LAMP .
- Refer to INSTALLING THE FLAP IN THE LUGGAGE COMPARTMENT WHEEL ARCH TRIM PANEL ON THE RIGHT .
- Refer to INSTALL LUGGAGE COMPARTMENT FLOOR COVERING .
- Refer to INSTALLING ROLLER COVER FOR LUGGAGE COMPARTMENT .