Installing the trim panel for the pedal assembly
WARNING: This page is about a different car, the 2023 BMW X5, 2022 BMW X5, 2021 BMW X5, 2020 BMW X5, and 2019 BMW X5. However, it is still accessible from the selected car via links, so may be relevant.
- Attach the trim panel for pedal assembly (2) and connect the corresponding connectors.
- Hook the trim panel for pedal assembly (2) in the guides (3) and fold it upwards.
NOTE:
TECHNICAL INFORMATION
The screw caps of the trim panel must be correctly locked in place. This is the only way to ensure that the trim panel does not loosen and, as a result, tilt into the pedal area.
The screw caps of the trim panel must be correctly locked in place. This is the only way to ensure that the trim panel does not loosen and, as a result, tilt into the pedal area.
- Use the screw caps (1) correctly and turn 90° to lock.