Remove the right rear torsion strut where required

WARNING: This page is about a different car, the 2023 BMW X5, 2022 BMW X5, 2021 BMW X5, 2020 BMW X5, and 2019 BMW X5. However, it is still accessible from the selected car via links, so may be relevant.

Removing the undershield (tank cover) at right

NOTE: Description is for left component only. Procedure on the right side is identical.

Removing the undershield (tank cover)

Unscrew all bolts and nuts (arrows).
Remove the underbody planking (1).

Courtesy of BMW OF NORTH AMERICA, INC.

Removing the right rear tension strut

NOTE: Description is for left component only. Procedure on the right side is identical.

Removing the rear tension strut

NOTE: TECHNICAL INFORMATION
Driving without the strut brace/front-end strut or tension strut is not permitted.

Unscrew the bolts (1) and the nut (2).
Remove tension strut (3).

Courtesy of BMW OF NORTH AMERICA, INC.

For dual-flow exhaust system:

Removing the rear left tension strut

NOTE: TECHNICAL INFORMATION
Driving without torsion strut is prohibited.

Removing the undershield (tank cover)

Unscrew all bolts and nuts (arrows).
Remove the underbody planking (1).

Courtesy of BMW OF NORTH AMERICA, INC.

Removing the rear tension strut

NOTE: TECHNICAL INFORMATION
Driving without the strut brace/front-end strut or tension strut is not permitted.

Unscrew the bolts (1) and the nut (2).
Remove tension strut (3).

Courtesy of BMW OF NORTH AMERICA, INC.