LEMON Manuals: Even more car manuals for everyone
Home >> BMW >> 2021 >> X7 xDrive40i >> Repair and Diagnosis >> External Pages >> Different car >> Section 190 (Maintenance And General Information - Repair -- X5 (G05)) >> 00 00 Maintenance >> 00 00 252 BMW engine oil service without supplementary service (X5 xDrive 40i, 2019-, X5 sDrive 40i, 2020-) >> Removing the oil filler cap

Removing the oil filler cap

WARNING: This page is about a different car, the 2023 BMW X5, 2022 BMW X5, 2021 BMW X5, 2020 BMW X5, and 2019 BMW X5. However, it is still accessible from the selected car via links, so may be relevant.
WARNING: Hot fluids  .
Risk of scalding! 
  • Conduct all work in the vehicle wearing appropriate personal protective equipment only.
WARNING: Hot surfaces  .
Risk of burning! 
  • Perform all work only on components that have cooled down.
NOTE: RISK OF DAMAGE 
Engine damage caused by excessively filling the engine with motor oil  .
Filling an excessive quantity of motor oil may cause engine damage  .
  • Observe the exact motor oil filling capacity.
  • Allow engine oil to drip off when draining.
NOTE: RISK OF DAMAGE 
Contaminant or foreign body  .
Contamination can result in malfunctions, loss of function or leaks  .
  • Adhere to the utmost cleanliness.
  • Protect components from contamination e.g. by covering.
  • Close off line connections with seal plugs.
NOTE: TECHNICAL INFORMATION 
Make sure the vehicle is operating temperature for engine oil service (engine oil temperature > 70°C).
NOTE: TECHNICAL INFORMATION 
Collect and dispose of emerging fluids. Observe country-specific waste disposal regulations.

Preliminary work