Installing the belt tensioner

• Position belt tensioner (1)  .
• Tighten the screw on the belt tensioner with a suitable socket wrench (2)  .

Courtesy of BMW OF NORTH AMERICA, INC.

Follow-up work 

• Refer to INSTALLING DRIVE BELT 
• Refer to INSTALLING THE COOLANT EXPANSION TANK FOR THE LOW-TEMPERATURE COOLANT CIRCUIT
• Refer to INSTALLING FAN COWL
• Refer to INSTALLING THE LEFT UNFILTERED-AIR DUCT
• Refer to INSTALLING INTAKE FILTER HOUSING
• Refer to INSTALLING THE RIGHT STRUT BRACE
• Refer to INSTALLING THE STRUT BRACE
• Refer to INSTALLING ACOUSTIC COVER
• Refer to INSTALLING THE REAR TOP CROSS CONNECTION
• Refer to INSTALLING TENSION STRUT ON LEFT AND RIGHT SHOCK TOWER
• Refer to INSTALLING UPPER CROSS CONNECTION
• Refer to INSTALLING THE COVER IN THE ENGINE COMPARTMENT AT TOP LEFT AND RIGHT