Installing oil feed line on turbocharger cylinders 5 to 8
- Remove the O-ring (1)
from the oil feed line (2)
.
- Replace O-ring (1)
.
Parts:
O-ring
 Courtesy of BMW OF NORTH AMERICA, INC.
|
- Feed in and position the oil feed line (2)
on the right of the crankcase.
- Tighten down screw (1)
.
TIGHTENING TORQUES SPECIFICATION
| Engine oil line to crankcase |
| M6 |
tightening torque |
10 Nm |
 Courtesy of BMW OF NORTH AMERICA, INC.
|