When replacing the right turbocharger: Remount components
- Unscrew the banjo bolt (1) .
- Loosen screw (2) .
- Remove the coolant pipe.
- Unscrew the banjo bolt (1) .
- Loosen screw (2) .
- Remove the coolant pipe (3)
.
- Replace the banjo bolt.
Parts: Hollow bolt
- Replace seals (1)
.
Parts: Seals
- Replace the right turbocharger.
Parts: Right turbocharger
- Position the coolant pipe (3) .
- Position the banjo bolt (1) and screw in several threads.
- Hand-tighten the bolt (2) .
- Tighten the banjo bolt (1)
.TIGHTENING TORQUES SPECIFICATION
Banjo bolt for coolant pipe to exhaust turbocharger Hollow bolt Replace the banjo bolt.
Joining torque8 Nm Angle of rotation 60° - Tighten down screw (2)
.TIGHTENING TORQUES SPECIFICATION
Coolant line to exhaust turbocharger M6x16 tightening torque 10 Nm - Replace the banjo bolt.
Parts: Hollow bolt
- Replace seals (1)
.
Parts: Seals
- Position the coolant pipe.
- Position the banjo bolt (1) and screw in several threads.
- Hand-tighten the bolt (2) .
- Tighten the banjo bolt (1)
.TIGHTENING TORQUES SPECIFICATION
Banjo bolt for coolant pipe to exhaust turbocharger Hollow bolt Replace the banjo bolt.
Joining torque8 Nm Angle of rotation 60° - Tighten down screw (2) .
TIGHTENING TORQUES SPECIFICATION
| Coolant line to exhaust turbocharger | ||
|---|---|---|
| M6x16 | tightening torque | 10 Nm |