Partially installing the trim on the rear bumper cover at bottom

• Install the trim on the bottom bumper cover (1)  and engage on the detents (2)  along the dotted line.

  Courtesy of VOLVO CARS CORPORATION

Follow-up work 

• Refer to INSTALLING THE REAR SIDE TRIM STRIP AT RIGHT AND LEFT .
• Refer to INSTALLING THE SUPPORTS FOR THE EXHAUST COVERS LEFT AND RIGHT .
• Refer to INSTALLING REAR BUMPER PANEL  .
• Refer to INSTALLING THE TRIM ON THE LOWER BUMPER COVER .
• Refer to INSTALLING REAR REFLECTOR .
• Refer to INSTALLING TAIL LIGHT ON LEFT AND RIGHT SIDE PANEL .
• Refer to INSTALLING THE FLAP IN THE LUGGAGE COMPARTMENT WHEEL ARCH TRIM PANEL ON THE RIGHT .
• Refer to INSTALLING THE FLAP IN THE LEFT LUGGAGE COMPARTMENT WHEEL ARCH TRIM PANEL .