Install the support for the bumper cover

• Install the support (3) for the bumper cover and tighten the nuts (2).
  TIGHTENING TORQUE SPECIFICATIONS
  
  

  Rear bumper support to body
  Nut
  	Tightening torque	108 Nm

  Courtesy of VOLVO CARS CORPORATION

• Tighten nuts (1).
  TIGHTENING TORQUE SPECIFICATIONS
  
  

  Rear silencer to bumper bracket
  M8
  	tightening torque	19 Nm

• Install the adapter (3) and mount the expanding rivets (2).
• Tighten the screws (1).
  TIGHTENING TORQUE SPECIFICATIONS
  
  

  Bumper panel, rear
  Hexagon screw
  	Tightening torque	3.0 Nm

  Courtesy of VOLVO CARS CORPORATION

Follow-up work 

• Refer to INSTALLING REAR BUMPER PANEL  .
• Refer to INSTALLING REAR REFLECTOR .
• Refer to INSTALLING TAIL LIGHT ON LEFT AND RIGHT SIDE PANEL .
• Refer to INSTALLING THE FLAP IN THE LUGGAGE COMPARTMENT WHEEL ARCH TRIM PANEL ON THE RIGHT .
• Refer to INSTALLING THE FLAP IN THE LEFT LUGGAGE COMPARTMENT WHEEL ARCH TRIM PANEL .