Installing the bearing bracket for the pedal mechanism

• Install bearing bracket (2).
• Replace nut (1).

  Parts:  Nut

• Fit nut (1) and tighten.
  TIGHTENING TORQUES SPECIFICATION
  
  

  Pedal bracket on body  Replace nut.
  M8 Replace nut.	Tightening torque	22 Nm

  Courtesy of BMW OF NORTH AMERICA, INC.

• Replace nuts (1).

  Parts:  Nuts

• Install the nuts (1) and tighten.
  TIGHTENING TORQUES SPECIFICATION
  
  

  Brake booster to pedal assembly console  Replace nuts.
  M8 Retighten 1x on brake booster after 10 min.	tightening torque	22 Nm

  Courtesy of BMW OF NORTH AMERICA, INC.

• Lock brake pedal (1) in place in the arrow direction with the brake booster.

Ensure that the brake pedal is completely locked with the brake booster! 

Courtesy of BMW OF NORTH AMERICA, INC.

Follow-up work 

• Refer to INSTALLING THE TRIM PANEL FOR THE PEDAL ASSEMBLY .