Installing the left hand seat

Courtesy of BMW OF NORTH AMERICA, INC.

Carefully lift the left seat (3) into the vehicle with a support person.

• Connect connectors (2) and lock.
• Correctly position and clip in the cable bracket (1).
• Correctly position the left hand seat (3).

  Disconnecting all battery ground leads 

  Courtesy of BMW OF NORTH AMERICA, INC.

• Tighten down screws (1).
  TIGHTENING TORQUE SPECIFICATIONS
  
  

  Seat rail to body
  Screw
  	42 Nm

  Courtesy of BMW OF NORTH AMERICA, INC.

• Check the attachment points of covers (1) and (3) for damage and, if necessary, replace covers (1) and (3).
• Correctly position the cover (1) and clip in at the marked area.
• Correctly position the covers (3) and clip them in.

  Courtesy of BMW OF NORTH AMERICA, INC.

  NOTE: Description is for right component only. The procedure on the left side is identical.
• Clip in the emergency release (2).
• Engage the rear seat backrest (1) toward the rear.

  Courtesy of BMW OF NORTH AMERICA, INC.

• Fold both rear seats forward.
• Tighten down screws (1).
  TIGHTENING TORQUE SPECIFICATIONS
  
  

  Seat rail to body
  Screw
  	42 Nm

  Courtesy of BMW OF NORTH AMERICA, INC.

• Check the attachment points of covers (1) and (2) for damage and, if necessary, replace covers (1) and (2).
• Correctly position and clip in the covers (1) and (2).
• Adjust both the rear seats to the normal position.

  Courtesy of BMW OF NORTH AMERICA, INC.