Remove the tail light on the right side panel
WARNING:
Work on components with requirements for a secure energy supply
Ensure proper function after a repair
Ensure proper function after a repair
- Lines are allowed to have only one repair area.
- Notices in the diagnostic system circuit diagrams must be observed.
NOTES ON THE CONTENT AND HANDLING OF DIAGNOSIS DOCUMENTS IN ISTA .
- When components are replaced, the notices in the applicable BMW parts catalogue must be observed.
Preliminary work
WARNING:
Work on components with requirements for a secure energy supply
Ensure proper function after a repair
Ensure proper function after a repair
- Lines are allowed to have only one repair area.
- Notices in the diagnostic system circuit diagrams must be observed.
NOTES ON THE CONTENT AND HANDLING OF DIAGNOSIS DOCUMENTS IN ISTA
- When components are replaced, the notices in the applicable BMW parts catalogue must be observed.
- Unclip cover (1) of the water channel in the arrow direction.
- Loosen nut (1).
- Loosen screws (1).
- Guide out tail light (2).NOTE: TECHNICAL INFORMATION
Observe the note on unlocking and disconnecting plug connections.
For additional information see: UNLOCKING AND DISCONNECTING DIFFERENT PLUG CONNECTIONS - Unlock the connector (1) on the tail light (2) and disconnect.