Removing the left and right retaining frame
NOTE:
Description is for left component only. Procedure on the right side is identical.
Removing the retaining frame
- Loosen screws (1)
.
- Guide out and remove holder (2)
.
 Courtesy of VOLVO CARS CORPORATION
|
- Unlock plug connections and disconnect.
- Release the wiring harness (1)
from all clips and remove it from the working area.
 Courtesy of VOLVO CARS CORPORATION
|
- Release blind rivet (1)
.
- Release the retaining frame (2)
from the locks (arrows) and remove it.
 Courtesy of VOLVO CARS CORPORATION
|