3334 Rear Wheel Steering System
3334 TIGHTENING TORQUE OVERVIEW
| Heat shield to HSR actuator | ||
| M6 Replace screw. |
Tightening torque | 8 Nm |
| HSR actuator ground cable on rear axle support | ||
| M6 | Tightening torque | 12 Nm |
| HSR actuator ground cable to body | ||
| Replace nut. | Tightening torque | 8 Nm |
| HSR actuator to rear axle support (bottom) | ||
| M12 Replace screw and nut. |
Joining torque | 100 Nm |
| Angle of rotation | 90° | |
| HSR actuator to rear axle support (top) | ||
| M14 Replace screws. |
Joining torque | 165 Nm |
| Angle of rotation | 90° | |
| Output shaft to wheel bearing | ||
| M16 Replace the collar screw. |
Joining torque | 210 Nm |
| Angle of rotation | 90° | |