Remove the mounted parts from the front axle support

Removing the right engine mount 

• Unscrew the bolts (1)  on the engine mount.
• Remove engine mount (2)  .

  Courtesy of BMW OF NORTH AMERICA, INC.

  Removing the anti-roll bar 

  NOTE: TECHNICAL INFORMATION
  Different variants may be installed depending on the vehicle equipment.

  Version A Removing the anti-roll bar 

• Loosen screws (1)  .
• Release the anti-roll bar (2)  with the upper section (3)  and the lower part (4)  of the retainer from the front subframe and remove it.

  Courtesy of BMW OF NORTH AMERICA, INC.

  Version B: Remove the active stabilizer 

• Loosen screws (1)  .
• Release the active anti-roll bar with the upper section (2)  and the lower part (3)  of the retainer from the front subframe.

  Courtesy of BMW OF NORTH AMERICA, INC.

• Loosen screws (1)  .
• Loosen the holder (2)  .
• Release the active anti-roll bar with the upper section (3)  and the lower part (4)  of the retainer from the front subframe and remove it.

  Courtesy of BMW OF NORTH AMERICA, INC.

  Removing the electromechanical steering gear 

• Loosen screws (1)  .
• Remove the electromechanical steering gear (2)  .

  Courtesy of BMW OF NORTH AMERICA, INC.