Partially installing storage compartment of center armrest
- Feed in the floor of storage compartment (2)
and when doing so connect the connector (1)
if necessary.
- Engage the floor of the storage compartment (2) at the clamps (3) .
- Tighten down screws (1)
.TIGHTENING TORQUES SPECIFICATION
Storage compartment on center console Oval-head screw Tightening torque 2.4 Nm - Install insert (1)
.
Installing trim in storage compartment of center armrest
- Install trim (2) .
- Connect connectors (1)
and lock.
- Feed trim (1)
into guides at bottom and engage at clamps at top.