Loosening and tying up brake caliper, left and right

NOTE: Perform the steps on the right and left side.

Detaching brake caliper and tying up

Release the brake hose (1) from the holders (2) .

Courtesy of BMW OF NORTH AMERICA, INC.
Remove cable (2) from holder (3) .
Only left: Remove cable (1) from holder (3) .

Courtesy of BMW OF NORTH AMERICA, INC.
Loosen screws (1) .
Release the brake caliper (2) from the swivel bearing.

Courtesy of BMW OF NORTH AMERICA, INC.
Tie up the brake caliper (1) with the special tool 2 413 317 .
NOTE: Do not let the brake caliper on the brake hose.

Courtesy of BMW OF NORTH AMERICA, INC.