Installing the right C-pillar trim panel

NOTE: Description is for left component only. Procedure on the right side is identical.

• Removing C-pillar trim panel 

WARNING: Airbag unit. 
Danger! Immobilization period-threatening injuries! 

• Before performing any work on the airbag, always disconnect the battery ground lead from the battery.
• Airbag unit may only be set down with the cushion (airbag itself) facing upwards.
• For additional information see: 72 00... SAFETY REGULATIONS ON HANDLING AIRBAG SYSTEM COMPONENTS/GAS GENERATORS

WARNING: Pyrotechnic components. 
Danger! Immobilization period-threatening injuries! 

• All work on pyrotechnic parts may be carried out by technically experienced and appropriately trained personnel only.
• Replace any damaged part or ones that have been dropped.
• For additional information see: 72 00... SAFETY REGULATIONS ON HANDLING AIRBAG SYSTEM COMPONENTS/GAS GENERATORS .

• Lever out the cover panel (1) from the C-pillar trim panel (2) with a suitable tool.
• Release screw below it.
• Feed out and remove the C-pillar trim panel (2).

Courtesy of BMW OF NORTH AMERICA, INC.