Install reinforcement strut

Position the reinforcement strut (2).
Replace the screw (1).
Parts: Screw
Screw in the screw (1) by hand force.
NOTE: Do not yet tighten the screw (1).

Courtesy of BMW OF NORTH AMERICA, INC.
Replace the screw (1) .
Parts: Screw

Tighten down screw (1) .

TIGHTENING TORQUES SPECIFICATION

Reinforcement strut to engine mount
M12 Replace screw.
	Tightening torque	108 Nm

Courtesy of BMW OF NORTH AMERICA, INC.

Tighten the screw (1) at the reinforcement strut (2) .

TIGHTENING TORQUES SPECIFICATION

Reinforcement strut to front subframe
M12 Replace screw.
	Tightening torque	108 Nm

Courtesy of BMW OF NORTH AMERICA, INC.