Removing the roller cam follower of the intake camshaft

NOTE: The description is provided only at one component. The procedure is the same for all other components.

Release and remove the roller cam follower (2) on the Intake side from the hydraulic valve clearance compensating element.
Place all roller cam followers In order In special tool 0 495 105 (11 4 480) .
Remove all hydraulic valve clearance compensating elements (1) to the top.
Place all hydraulic valve clearance compensating elements Into the special tool 0 495 105 (11 4 480) along with the roller cam followers In order.

Courtesy of BMW OF NORTH AMERICA, INC.