Partially installing the front right wheel arch trim (door sill)
NOTE:
Description is for left component only. Procedure on the right side is identical.
- Installing the front wheel arch trim on the door sill (partially removed)
- Only for G05/G18/F95:
- Check the clips (2)
for damage and replace if necessary.
Check sealing ring for damage, replace if necessary.
The sealing ring must not be damaged or missing.
- Position the wheel arch trim (1)
and engage at the clips (2)
.
- Only for G06/G07:
- Check the clips (2)
and sealing ring for damage and, if necessary, replace them.
The sealing ring must not be damaged or missing.
- Check the detents for damage; if necessary, replace the wheel arch trim (1) .
- Position the wheel arch trim (1) and engage at the clips (2) .
- Engage the wheel arch trim (1)
at the detents along the dotted line.