Installing the right-hand engine ventilation line and the crankcase ventilation intake pipe
- Check the sealing rings (1)
of the engine ventilation line (2)
for correct placement and for damage, and replace if necessary.
- Mount the engine ventilation line (3) on the cylinder head cover.
- Tighten down screws (1)
.TIGHTENING TORQUE SPECIFICATIONS
Engine ventilation line screw Tightening torque 10 Nm - Connect the engine ventilation line (3) to the clean air pipe and lock the lock (2) .
- Replace the intake pipe (1)
of crankcase ventilation.
- Connect the intake pipe of the crankcase ventilation (1)
to the right cylinder head cover and audibly lock.