Install heat shield, top

Install top heat shield (2) .

Tighten down screws (1) .

TIGHTENING TORQUE SPECIFICATIONS

Heat protection plate
M6x16
	tightening torque	10 Nm

G14251470

Courtesy of BMW OF NORTH AMERICA, INC.

Install holder (4) .

Tighten down screws (3) .

TIGHTENING TORQUE SPECIFICATIONS

Holder control sensor cable to the cylinder head cover
M6x16
	tightening torque	8 Nm

G14369337

Courtesy of BMW OF NORTH AMERICA, INC.

Secure cable to the clamp (2) .
Pin up connector (1) and lock audibly.