Install A-pillar trim panel
WARNING: This page is about a different car, the 2023 BMW X5, 2022 BMW X5, 2021 BMW X5, 2020 BMW X5, and 2019 BMW X5. However, it is still accessible from the selected car via links, so may be relevant.
WARNING:
Pyrotechnic components
.
Danger! Immobilization period-threatening injuries!
Danger! Immobilization period-threatening injuries!
- All work on pyrotechnic parts may be carried out by technically experienced and appropriately trained personnel only.
- Replace any damaged part or ones that have been dropped.
- For additional information see: SAFETY REGULATIONS FOR HANDLING COMPONENTS WITH GAS GENERATORS .
- Insert the A-pillar trim panels (2) and clip into the clips (3).
- Tighten down screw.
TIGHTENING TORQUE SPECIFICATIONS
| Body pillar trim | ||
|---|---|---|
| Screw 4.8x38 | Tightening torque | 3.0 Nm |
- Clip in the cover (1).
WARNING:
Pyrotechnic components
.
Danger! Immobilization period-threatening injuries!
Danger! Immobilization period-threatening injuries!
- All work on pyrotechnic parts may be carried out by technically experienced and appropriately trained personnel only.
- Replace any damaged part or ones that have been dropped.
- For additional information see: SAFETY REGULATIONS FOR HANDLING COMPONENTS WITH GAS GENERATORS .
- Insert the A-pillar trim panels (2) and clip into the clips (3).
- Before the completing the screw connection, add a drop of screw locking agent on the screw thread of the mounting bolt.
ADHESIVE SPECIFICATIONS
| Screw lock Loctite Stick 243, medium strength | 10 ml, Bottle | 83192210339 |
- Tighten down screw.
TIGHTENING TORQUE SPECIFICATIONS
| Body pillar trim | ||
|---|---|---|
| M5x30 screw | tightening torque | 2.5 Nm |
- Clip in the cover (1).