Installing left and right C-pillar trim panels at the bottom
WARNING: This page is about a different car, the 2023 BMW X5, 2022 BMW X5, 2021 BMW X5, 2020 BMW X5, and 2019 BMW X5. However, it is still accessible from the selected car via links, so may be relevant.
Install the bottom C-pillar trim panel
NOTE:
Description is for left component only. Procedure on the right side is identical.
- Feed in C-pillar trim panel (2) in the door sill cover strip and position correctly.
- Clip in C-pillar trim panel (2) at the clips (3).
- Tighten down screw (1).
TIGHTENING TORQUE SPECIFICATIONS
| C-pillar trim panel at the bottom of the body | ||
| Screw 4.8x16 | Tightening torque | 1.4 Nm |