Installing left and right A-pillar trim panel

WARNING: This page is about a different car, the 2023 BMW X5, 2022 BMW X5, 2021 BMW X5, 2020 BMW X5, and 2019 BMW X5. However, it is still accessible from the selected car via links, so may be relevant.

NOTE: Description is for left component only. Procedure on the right side is identical.

Install A-pillar trim panel

WARNING: Pyrotechnic components .
Danger! Immobilization period-threatening injuries!

All work on pyrotechnic parts may be carried out by technically experienced and appropriately trained personnel only.
Replace any damaged part or ones that have been dropped.
For additional information see: SAFETY REGULATIONS FOR HANDLING COMPONENTS WITH GAS GENERATORS .

Insert the A-pillar trim panels (2) and clip into the clips (3).
Tighten down screw.

TIGHTENING TORQUE SPECIFICATIONS

Body pillar trim
Screw 4.8x38	Tightening torque	3.0 Nm

Clip in the cover (1).

Courtesy of BMW OF NORTH AMERICA, INC.