Install glove compartment
WARNING: This page is about a different car, the 2023 BMW X5, 2022 BMW X5, 2021 BMW X5, 2020 BMW X5, and 2019 BMW X5. However, it is still accessible from the selected car via links, so may be relevant.
- Guide the glove compartment into the dashboard and also connect and lock all plugs.
- Slightly raise the glove box lid (1) as shown and tighten the screws (2).
TIGHTENING TORQUE SPECIFICATIONS
| Glove compartment to dashboard | ||
|---|---|---|
| screw | Tightening torque | 1.8 Nm screw |
- Tighten the screws (1) from behind on the hinge of the glove compartment.
TIGHTENING TORQUE SPECIFICATIONS
| Glove compartment to dashboard | ||
|---|---|---|
| screw | Tightening torque | 1.8 Nm screw |
- Tighten screws (2).
TIGHTENING TORQUE SPECIFICATIONS
| Glove compartment to dashboard | ||
|---|---|---|
| screw | Tightening torque | 1.8 Nm |
TIGHTENING TORQUE SPECIFICATIONS
| Glove compartment to dashboard | ||
|---|---|---|
| screw | Tightening torque | 1.8 Nm |
- Tighten the screws (1) in the glove compartment.
TIGHTENING TORQUE SPECIFICATIONS
| Glove compartment to dashboard | ||
|---|---|---|
| screw | Tightening torque | 1.8 Nm |
- Fasten the plug connection (1) at the glove compartment.
Follow-up work
- Refer to INSTALLING THE GLOVE BOX LIGHT .
- Refer to INSTALL RIGHT FOOTWELL TRIM .
- Refer to INSTALLING THE SIDE PANEL ON DASHBOARD ON THE RIGHT .