Install the cup holder
WARNING: This page is about a different car, the 2023 BMW X5, 2022 BMW X5, 2021 BMW X5, 2020 BMW X5, and 2019 BMW X5. However, it is still accessible from the selected car via links, so may be relevant.
- Connect associated connector.
- Install the cup holder (1).
- Tighten down screws (2).
TIGHTENING TORQUE SPECIFICATIONS
| Cup holder to center console | ||
|---|---|---|
| Oval-head screw | Tightening torque | 2.4 Nm |
- Insert the insert (1).
Follow-up work
- Refer to INSTALLING THE CENTER CONSOLE TRIM .
- Refer to INSTALLING THE CARPET ON THE CENTER CONSOLE AT LEFT AND RIGHT SIDES .
- Refer to CONNECTING ALL BATTERY GROUND LEADS .
- Refer to ACTIVATING THE 48 V ELECTRICAL SYSTEM .