Install the center console

WARNING: This page is about a different car, the 2023 BMW X5, 2022 BMW X5, 2021 BMW X5, 2020 BMW X5, and 2019 BMW X5. However, it is still accessible from the selected car via links, so may be relevant.

NOTE: RISK OF DAMAGE
Careless handling of tools and sharp-edged components .
Scratches, surface damage .

Protect working area.
Handle tools and components carefully.

NOTE: TECHNICAL INFORMATION
Conduct the following operation with the assistance of a second person.

Position center console (1).
Connect the connector (2) to the Head Unit High (HU-H) and lock.
Correctly position the center console (1) and install.
When doing so, feed in the remaining cable into the center console.

Courtesy of BMW OF NORTH AMERICA, INC.

NOTE: Perform the steps on the right and left side.

Tighten the nut (1) and the bolts (2).

TIGHTENING TORQUE SPECIFICATIONS

Center console to body
M6x16 screw	Tightening torque	4.6 Nm
Nut M6	Tightening torque	4.6 Nm

Courtesy of BMW OF NORTH AMERICA, INC.

Connect connectors (1) and lock.

Courtesy of BMW OF NORTH AMERICA, INC.
Connect the connector (1) to the right side of the center console and lock.

Courtesy of BMW OF NORTH AMERICA, INC.
Connect connectors (1) and lock.
Attach the connector (1) to the bracket.

Courtesy of BMW OF NORTH AMERICA, INC.
Carry out only for G05/G06:
Tighten down screws (1).

TIGHTENING TORQUE SPECIFICATIONS

Center console to body
M6x16 screw	Tightening torque	4.6 Nm
Nut M6	Tightening torque	4.6 Nm

Courtesy of BMW OF NORTH AMERICA, INC.

Follow-up work

Refer to PARTIALLY INSTALLING STORAGE COMPARTMENT OF CENTER ARMREST .
Refer to INSTALLING THE CARPET ON THE CENTER CONSOLE AT LEFT AND RIGHT SIDES .
Refer to INSTALLING THE REAR CENTER CONSOLE TRIM .
Refer to CONNECTING ALL BATTERY GROUND LEADS .
Refer to ACTIVATING THE 48 V ELECTRICAL SYSTEM .