Installing transmission cross member
WARNING: This page is about a different car, the 2023 BMW X5, 2022 BMW X5, 2021 BMW X5, 2020 BMW X5, and 2019 BMW X5. However, it is still accessible from the selected car via links, so may be relevant.
- Install the transmission cross member (3).
- Tighten down screw (2).TIGHTENING TORQUE SPECIFICATIONS
Transmission cross member to rubber mounts M12 tightening torque
68 Nm - Tighten the screws (1).TIGHTENING TORQUE SPECIFICATIONS
Transmission cross member to body M8 tightening torque
19 Nm - Remove the transmission jack.
Follow-up work
- Refer to INSTALLING UNDERBODY PROTECTION AT REAR .