Install the stiffening plate

WARNING: This page is about a different car, the 2023 BMW X5, 2022 BMW X5, 2021 BMW X5, 2020 BMW X5, and 2019 BMW X5. However, it is still accessible from the selected car via links, so may be relevant.

Feed in the thrust field (4) in the area (5) of the wheel arch trim panel and position it on the front subframe.
Replace the bolts (arrows).
Parts: screw

Tighten screws (arrows).

TIGHTENING TORQUE SPECIFICATIONS

Thrust field to front axle support
M10 Replace screws.	Joining torque	56 Nm
	Angle of rotation	90°

Courtesy of BMW OF NORTH AMERICA, INC.

Tighten down screws (3).

TIGHTENING TORQUE SPECIFICATIONS

Cover, steering unit
Thermoplastic hexagon screw	Tightening torque	2.6 Nm

Tighten screws (2).

TIGHTENING TORQUE SPECIFICATIONS

Wheel arch cover
Thermoplastic hexagon screw	Tightening torque	2.6 Nm
Plastic nut	Tightening torque	2.6 Nm

Tighten the screws (1).

TIGHTENING TORQUE SPECIFICATIONS

Undershield/frame
Hexagon screw	tightening torque	3 Nm