Installing the right intake silencer bracket

WARNING: This page is about a different car, the 2023 BMW X5, 2022 BMW X5, 2021 BMW X5, 2020 BMW X5, and 2019 BMW X5. However, it is still accessible from the selected car via links, so may be relevant.

Position the holder (3) on the right.

Tighten the screws (1).

TIGHTENING TORQUE SPECIFICATIONS

Screw on the holder of the intake silencer
M6x16 screw	tightening torque	10 Nm

Courtesy of BMW OF NORTH AMERICA, INC.

Tighten nut (2).

TIGHTENING TORQUE SPECIFICATIONS

Nut on the holder of intake silencer
Nut M6	tightening torque	8 Nm