Installing the holder for the roller cover for luggage compartment
WARNING: This page is about a different car, the 2023 BMW X5, 2022 BMW X5, 2021 BMW X5, 2020 BMW X5, and 2019 BMW X5. However, it is still accessible from the selected car via links, so may be relevant.
- Feed in and correctly position the holder for the roller cover for luggage compartment (2).
- Tighten the screws (1).TIGHTENING TORQUE SPECIFICATIONS
Holder for roller cover for luggage compartment on body M8x20 screws Tightening torque 8.5 Nm - Feed in and correctly position the holder for the roller cover for luggage compartment (2).
- Tighten the screws (1).
TIGHTENING TORQUE SPECIFICATIONS
| Holder for roller cover for luggage compartment on rear of body | ||
| Screws TS5x16 | Tightening torque | 3.0 Nm |