Install front axle differential
WARNING: This page is about a different car, the 2023 BMW X5, 2022 BMW X5, 2021 BMW X5, 2020 BMW X5, and 2019 BMW X5. However, it is still accessible from the selected car via links, so may be relevant.
- Check whether the O-ring (1) is positioned correctly and is not damaged.
- If applicable, correct or replace the O-ring (1).
- Coat the O-ring (1) with front axle transmission oil.
- Position front axle differential (3).
- Make sure installation locations of marked screws (1) and (2) are correct.
Screws (1): M12x105
Screws (2): M12x55
- Tighten down screws (1) and (2).
TIGHTENING TORQUE SPECIFICATIONS
| Front axle final drive to motor oil pan | ||
| M12 | tightening torque | 140 Nm |