Installing the center cowl upper part
WARNING: This page is about a different car, the 2023 BMW X5, 2022 BMW X5, 2021 BMW X5, 2020 BMW X5, and 2019 BMW X5. However, it is still accessible from the selected car via links, so may be relevant.
- Installing the center cowl upper part (3).
- Tighten down screws (2).
TIGHTENING TORQUE SPECIFICATIONS
| Cowl upper part center to bottom cowl | ||
| Screw | tightening torque | 2.6 Nm |
- Use the holders to fasten the wire (1) to the center cowl upper part (3).
- Tighten down screws (1).
TIGHTENING TORQUE SPECIFICATIONS
| Cowl upper part center to bottom cowl | ||
| Screw | tightening torque | 2.6 Nm |