Install the connecting supports on the tunnel
WARNING: This page is about a different car, the 2023 BMW X5, 2022 BMW X5, 2021 BMW X5, 2020 BMW X5, and 2019 BMW X5. However, it is still accessible from the selected car via links, so may be relevant.
- Position the connecting support (2) on the tunnel.
- Replace screws (1).
Parts:
Screws
- Tighten down screws (1).
TIGHTENING TORQUE SPECIFICATIONS
| Connecting support on tunnel to body |
Hexagon screw M10x25
Replace screws |
Joining torque
Angle of rotation |
56 Nm
90° |
 Courtesy of BMW OF NORTH AMERICA, INC.
|