Install tension strut on left and right shock tower

WARNING: This page is about a different car, the 2023 BMW X5, 2022 BMW X5, 2021 BMW X5, 2020 BMW X5, and 2019 BMW X5. However, it is still accessible from the selected car via links, so may be relevant.

NOTE: Description is for left component only. Procedure on the right side is identical.

Install the tension strut on the right shock tower

NOTE: TECHNICAL INFORMATION
Driving without the strut brace/front-end strut or tension strut is not permitted.

(3) Install tension strut on shock tower.
Replace the screw (1).
Parts: Screw

Tighten screw (1) with the special tool 0 490 504 (00 9 120) .

TIGHTENING TORQUE SPECIFICATIONS

Tension strut to shock tower
M10x55 screw Replace screws	Joining torque Angle of rotation	56 Nm 90°

Courtesy of BMW OF NORTH AMERICA, INC.

Tighten down screw (2).

TIGHTENING TORQUE SPECIFICATIONS

Tension strut on the rear cross connection
M8x30 screw	Tightening torque	28 Nm

Repair thread on the spring bolt

Repair the damaged thread with a Helicoil thread insert.

CONSUMABLE SPECIFICATIONS

Helicoil thread insert

M10x25 mm

33 30 6 782 756