Install rear section of the front right wheel arch cover

WARNING: This page is about a different car, the 2023 BMW X5, 2022 BMW X5, 2021 BMW X5, 2020 BMW X5, and 2019 BMW X5. However, it is still accessible from the selected car via links, so may be relevant.

NOTE: Description is for left component only. Procedure on the right side is identical.

Install the rear section of the front wheel arch cover

NOTE: To provide a better overview: Schematic diagram with partially hidden components.

Feed in the rear section of the wheel arch cover (1).
Tighten screws (arrows).

TIGHTENING TORQUE SPECIFICATIONS

Wheel arch cover
Thermoplastic hexagon screw	Tightening torque	2.6 Nm
Plastic nut	Tightening torque	2.6 Nm

Courtesy of BMW OF NORTH AMERICA, INC.