Installing the trunk lid seal
WARNING: This page is about a different car, the 2023 BMW X5, 2022 BMW X5, 2021 BMW X5, 2020 BMW X5, and 2019 BMW X5. However, it is still accessible from the selected car via links, so may be relevant.
- Remove sealant residue from the sheet metal flange.
- Clean the sheet metal flange with solvent cleaner R2.
CONSUMABLE SPECIFICATIONS
| Cleaning agent R2 | 500 ml | 83190417324 |
- Replace the trunk lid seal (1).
Parts: Trunk lid seal
- Mount the trunk lid seal (1) starting from the top middle.
- Make sure that the seal for the for the trunk lid (1) is positioned correctly against adjacent trim panel components.
Check
- Check the closing function of the trunk lid.
Result
» The trunk lid does not close correctly.
Measure
- Make sure that the seal for the for the trunk lid (1) is positioned correctly against adjacent trim panel components.