Installing the rear tension strut
WARNING: This page is about a different car, the 2023 BMW X5, 2022 BMW X5, 2021 BMW X5, 2020 BMW X5, and 2019 BMW X5. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:
TECHNICAL INFORMATION
Driving without the strut brace/front-end strut or tension strut is not permitted.
Driving without the strut brace/front-end strut or tension strut is not permitted.
NOTE:
Description is for left component only. Procedure on the right side is identical.
- Install the tension strut (3).
- Tighten the screws (1) and the nut (2).
TIGHTENING TORQUE SPECIFICATIONS
| Torsion strut on body and holder | ||
|---|---|---|
| M12x25 Replace screws. |
Joining torque | 100 Nm |
| Angle of rotation | 90° | |
| Nut M10 | Tightening torque | 38 Nm |
Follow-up work
- Refer to INSTALLING UNDERSHIELD (TANK COVER) .