Removing front entrance cover strip
WARNING: This page is about a different car, the 2023 BMW X5, 2022 BMW X5, 2021 BMW X5, 2020 BMW X5, and 2019 BMW X5. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:
Description is for left component only. Procedure on the right side is identical.
NOTE:
RISK OF DAMAGE
Bending of plastic components .
Application of too much force can lead to bending of plastic components .
Bending of plastic components .
Application of too much force can lead to bending of plastic components .
- Place special tool directly beside the mounting clip.
- Continue un-clipping the part without using the tool if possible.
- Detach the front door sill cover strip (1) upwards from the clamps (2) and clips (3) using the special tool 0 496 569 (00 9 325) .
- If applicable, disconnect the plug connection and remove the front door sill cover strip (1).