Shifting vehicle into normal position
WARNING: This page is about a different car, the 2023 BMW X5, 2022 BMW X5, 2021 BMW X5, 2020 BMW X5, and 2019 BMW X5. However, it is still accessible from the selected car via links, so may be relevant.
- Only on vehicles with air spring system: Perform ride height adjustment with diagnostic system.
- Check vehicle interior and trunk (including luggage compartment well) for load status, if applicable, unload vehicle.
- Lay prescribed DIN load into the vehicle.
TECHNICAL DATA SPECIFICATIONS
| DIN normal position loading | ||
| Vehicle has a full tank. Vehicle is completely assembled. Per front seat (seat in center position) |
68 kg | |
| On the center rear seat | 68 kg | |
| Centered in the trunk | 21 kg | |
- Only on vehicles with air spring system:
After the vehicle has been loaded, start the engine and wait until the vehicle ride height has been adjusted.NOTE: (The doors must be closed)