Releasing the right and left spring strut holder from the bottom wishbone
WARNING: This page is about a different car, the 2023 BMW X5, 2022 BMW X5, 2021 BMW X5, 2020 BMW X5, and 2019 BMW X5. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:
Perform the steps on the right and left side.
Release the spring strut holder from the bottom wishbone
- Unfasten nut (1).
- Punch in the swivel bearing (2) at the front towards the inner.
- (3) Pull out screw.
- Release the spring strut holder from the bottom wishbone.
 Courtesy of BMW OF NORTH AMERICA, INC.
|