Release the left and right output shaft from the wheel bearing
WARNING: This page is about a different car, the 2023 BMW X5, 2022 BMW X5, 2021 BMW X5, 2020 BMW X5, and 2019 BMW X5. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:
Perform the steps on the right and left side.
Loosen the output shaft from the wheel bearing
- Press brake pedal.
- Loosen the collar screw (1).
Do not leave the output shaft suspended at the joint, tie up the output shaft if necessary.
 Courtesy of BMW OF NORTH AMERICA, INC.
|