Checking the camber
WARNING: This page is about a different car, the 2023 BMW X5, 2022 BMW X5, 2021 BMW X5, 2020 BMW X5, and 2019 BMW X5. However, it is still accessible from the selected car via links, so may be relevant.
Check
- Check camber with wheel alignment.
Desired state
- Camber within the tolerance.
Result
» Camber below the tolerance.
Measure
- Replace the upper wishbone with an upper wishbone that is more positive than the previously installed upper wishbone.
Check
- Check camber with wheel alignment.
Result
» Camber above the tolerance.
Measure
- Replace the upper wishbone with an upper wishbone that is more negative than the previously installed upper wishbone.