1165 TURBOCHARGER (X7 xDrive50i 2019-2020)
1165 TIGHTENING TORQUE OVERVIEW
| Exhaust turbocharger to exhaust manifold | ||
| V-ribbon clip Replace V-ribbon clip. |
Tightening torque | 13 Nm |
| Heat protection plate | ||
| M6x16 | Tightening torque | 10 Nm |
| Heat protection plate | ||
| M6x12 screw Replace screw. |
Tightening torque | 10 Nm |
| Lock nut on wastegate valve controller to exhaust turbocharger | ||
| M6 | Tightening torque | 6.6±1 Nm |
| Oil return line at the exhaust turbocharger | ||
| M6x16 Replace screws. |
Joining torque | 5 Nm |
| Angle of rotation | 60° | |
| Wastegate valve controller to exhaust turbocharger | ||
| M4x12 | Tightening torque | 2 ± 0.3 Nm |